E75 Grade API 5DP Drill Pipe
E75 Grade steel tube API 5DP Drill Pipe
API 5DP Drill Pipe
Drill Pipe manufactured strictly according to API 5DP standard
Yield strength: Min 517 Mpa
Tensile strength: Min 724 Mpa
Pipe body material: High quality alloy seamless pipe of E75
Thread treatment: Phosphorization or copper plating
Drill Pipe in API 5DP, Diameters from 2 3/8'' to 6 5/8'', Grade DZ50, E75, R780, X95, G105, S135
Specification
API Drilll Pipe Grade | Minimum Yeild Strength | Minimum Tensile Strength |
E-75 | 75000 | 100000 |
X-95 | 95000 | 105000 |
G-105 | 105000 | 115000 |
S-135 | 135000 | 145000 |
Detailed information about API SPEC 5DP Drill pipe
Size Inch | Nominal Weight | Weight c/w blank end | OD | Wall Thickness | Grade | Upset Type | |||
lb/ft | Kg/m | inch | mm | inch | mm | ||||
2-3/8 | 6.65 | 6.27 | 9.33 | 2.375 | 60.3 | 0.280 | 7.11 | E,X,G,S | EU |
2-7/8 | 10.4 | 9.72 | 14.47 | 2.875 | 73.0 | 0.362 | 9.19 | E,X,G,S | EU |
3 1/2 | 13.3 | 12.32 | 18.34 | 3.500 | 88.9 | 0.368 | 9.35 | E,X,G,S | EU |
3 1/2 | 15.5 | 14.64 | 21.79 | 3.500 | 88.9 | 0.449 | 11.4 | E,X,G,S | EU |
4 | 14.0 | 12.95 | 19.27 | 4.000 | 101.6 | 0.330 | 8.38 | E,X,G,S | EU,IU |
4 1/2 | 16.6 | 15.00 | 22.32 | 4.500 | 114.3 | 0.337 | 8.56 | E,X,G,S | EU,IEU |
4 1/2 | 20.0 | 18.71 | 27.84 | 4.500 | 114.3 | 0.430 | 10.92 | E,X,G,S | EU,IEU |
5 | 19.5 | 17.95 | 26.70 | 5000 | 127.0 | 0.362 | 9.19 | E,X,G,S | IEU |
5 | 25.6 | 24.05 | 35.80 | 5000 | 127.0 | 0.500 | 12.7 | E,X,G,S | IEU |
5 1/2 | 21.9 | 19.83 | 29.52 | 5.500 | 139.7 | 0.361 | 9.17 | E,X,G,S | IEU |
5 1/2 | 24.7 | 22.56 | 33.57 | 5.500 | 139.7 | 0.415 | 10.54 | E,X,G,S | IEU |
6 5/8 | 25.2 | 22.2 | 33.04 | 6.625 | 168.275 | 0.330 | 8.38 | E,X,G,S | IEU |
6 5/8 | 27.7 | 24.23 | 36.05 | 6.625 | 168.275 | 0.362 | 9.19 | E,X,G,S | IEU |
As API Spec 5DP Drill Pipe Manufacturer ROSCHEN Supplies OCTG Steel Drill Pipes, E75, X95, G105, S135, 2-6 5/8 inches, 6.88-12.7 mm O.D, R1, R2, R3.
Product: OCTG Steel Drill Pipe, API 5DP.
Grade: E75, X95, G105, S135.
2. Pipe Size: 2 - 6 5/8 inches (2 3/8", 2 7/8", 3 1/2, 4", 4 1/2", 5", 5 1/2", 6 5/8").
3. Wall Thickness: 6.88 mm - 12.7 mm O.D.
4. Length: R1: 5.49 - 6.71m, R2: 8.23 - 9.14m, R3: 11.58 - 13.72m.
5. Standard: API Spec 5DP.
Main uses: for well drilling.
Galvanized Iron , Carbon Steel E75 Api Spec 5d And Api Spec 7 Drill Pipe
Our drill pipe is designed to provide superior technical performance and a service life exceeding most current industry standards.
Our drill pipes are available with:•Proprietary oversized minimum internal upset (MIU), for better fatigue resistance (where applicable)
Longer tool joints, providing a maximum re-cut capability for longer service life
Higher toughness specification on pipe body, weld, and tool joint, providing greater safety margins in extreme drilling conditions
