Hyper Deep Hole Hammers
Created on:2020-09-07 20:13
The DTH hammer piston always makes direct contact with the drill bit and there is generally no loss of transmitted energy as the hammer drills deeper, as is the case with drifter (top hammer) rigs. Roschen group limited offers a wide range of DTH hammers suitable for a variety of drilling operations.
Hyper Deep Hole Hammers | ||||
Model | Hyper 55DH | Hyper 55DH | Hyper 66DH | Hyper 66DH |
Shank Type | QL50 | DHD 350R | DHD 360 | QL60 |
Outside Diameter (inches) | 4.66 | 4.66 | 5.62 | 5.62 |
Hammer Length (inches) | 41.78 | 41.78 | 43.03 | 40.9 |
Hammer Weight (pounds) | 125.6 | 125.6 | 219 | 219 |
Backhead Connection* | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin |
Air Consumption (cfm) | 150 psi: 182 | 150 psi: 182 | 150 psi: 296 | 150 psi: 296 |
200 psi: 280 | 200 psi: 280 | 200 psi: 456 | 200 psi: 456 | |
250 psi: 391 | 250 psi: 391 | 250 psi: 637 | 250 psi: 637 | |
300 psi: 514 | 300 psi: 514 | 300 psi: 838 | 300 psi: 838 | |
350 psi: 648 | 350 psi: 648 | 350 psi: 1058 | 350 psi: 1058 | |
400 psi: 791 | 400 psi: 791 | 400 psi: 1290 | 400 psi: 1290 | |
430 psi: 910 | 430 psi: 910 | 430 psi: 1440 | 430 psi: 1440 | |
*Other backhead thread connections are available. |