NQ3 HQ3 PQ3 Surface Set Diamond Bit for exploration diamond core drilling samples
NQ3 HQ3 PQ3 Surface Set Diamond Bit for exploration diamond core drilling samples
NQ HQ PQ Surface Set Diamond Bit for exploration diamond core drilling samples
Surface Set Diamond Bit
Natural diamond surface set bits differ from impregnated bits, they are only set with a single layer of natural or synthetic diamond utilizing a hard matrix compound on the face of the bit. Its waterways are usually shallower than an impregnated bit because of the single layer of the diamonds. The diamond set design ensures sufficient overlap to prevent premature wear of the matrix.
Category: Downhole Tools
Tags: Diamond Bit, Surface Set Diamond Bit, natural diamond core bits, Surface Set natural Diamond Bi
Surface Set Diamond Bit
Surface-Set diamond bits are primarily recommended for use in drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bits. They are also recommended for use in drilling harder formations where the available
rotational speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.
Our company can manufacture a wide range of surface set bits, which includes a variety of bit crowns,diamond grades and sizes, designed to provide the biggest cutting efficiency in various rock formations. Some bits are designed with face discharge holes to minimize core wash when drilling in soft and fractured formations.
Diamond size selection: The harder the rock is, the smaller the diamonds we should use. The amount of diamonds is one of very important factors to the bit cutting efficiency, Our engineers use mathematical formulas to set each diamond on bit cutting area to ensure proper overlap with a minimum of diamonds to keep the initial bit cost as low as possible in a balance design.
| Wireline diamond core bits specifications | ||
| SIZE | CORE Ø | HOLE Ø |
| AQTK | 35.5 mm (1-3/8 in) | 48 mm (1-7/8 in) |
| BQ | 36.4 mm (1-7/16 in) | 60 mm (2-3/8 in) |
| BQTK | 40.7 mm (1-5/8 in) | 60 mm (2-3/8 in) |
| NQ | 47.6 mm (1-7/8 in) | 75.7 mm (3 in) |
| NQTK (NQ2") | 50.6 mm (2 in) | 75.7 mm (3 in) |
| NQ3 | 45 mm (1-3/8 in) | 75.7 mm (3 in) |
| HQ | 63.5 mm (2-1/2 in) | 96 mm (3-3/8 in) |
| HQ3 | 61.1 mm (2-3/8 in) | 96 mm (3-3/8 in) |
| PQ3 | 85 mm (3-3/8 in) | 122.6 mm (4-7/8 in) |
| PQ3 | 83 mm (3-1/4 in) | 122.6 mm (4-7/8 in) |
FAQ
1. How do I buy or post an RFQ on roschen.com？
Buy or post an RFQ on roschen.com, You can use the following three ways:
1.1 Click contact now, fill in the form and submit.
1.2 Send a message to roschen@roschen.com or call +86 137 6419 5009.
1.3 Create an account, add the product to the inquiry cart and submit.
After receiving your request, we will get in touch with you within 48 hours.
2. How to view more product details, such as price, MOQ, shipping fee?
In addition to viewing all product information from this page, you can also send your needs to roschen@roschen.com, we will introduce you more details.
3. What is the quality of the product and is it genuine?
ROSCHEN has an independent third-party inspection team, which strictly controls the quality of products, guarantees genuine products and eliminates fakes.
4.How is the product cost-effective？
ROSCHEN has been deeply engaged in the field of oil and gas energy for many years, integrating a large number of high-quality supply channels. Our products are comprehensive and the price advantage is obvious.
5. When will I receive my order?
The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-20 days. In addition, contact us to get the full time of the order.
