Atlas Copco Overburden Drilling Tools

Add Time:





Atlas Copco Symmetrix Bits

Atlas Copco Overburden Drilling Tools

Atlas Copco overburden drilling products at Rock Drill Sales and Service. 

As much as 90% of the land surface of the earth is covered with loose, unconsolidated material such as soil, clay, silt, sand, gravel and boulders, which varies in depth from a few centimetres to hundreds of meters.

Drilling through this so-called overburden is often problematic, due to the tendency of the earth to cave in behind the drill bit.

This makes it difficult to retrieve the drill string after the hole has been drilled. In practice, the bore hole is often lost before a casing tube can be inserted to support it.

Other problems are caused by cavities or porous ground, which interfere with the circulation of the flushing medium and prevent the drill cuttings from being flushed out of the hole.

In places where overburden strata are mixed, or when their drillability is unknown, it is difficult for the driller to decide what tools to use in order to get the best overall results

without risking the loss of equipment in the hole.

The best solution for dealing with such problems is to use ODEX equipment.

Out Dia. (A) mmInner Dia. (B) mmReamed Dia. (C) mmInner Dia.of Casing Shoe (D) mmHammer Type (E)Drill Pipe mm
10893 - 9911887ROS35/QL3076
114102 - 10812393ROS35/QL3076
127115 - 117136102ROS35/QL3076
140124 - 128152115ROS45/QL4076
146130 - 134154121ROS45/QL4076
168148 - 156185140ROS55/QL5089
178158 - 166195150ROS55/QL5089
194174 - 182211166ROS65/QL60114
219199 - 207237193ROS65/QL60114
245225 - 233260210ROS85/QL80114
273253 - 257308241ROS85/QL80114
325305 - 309378281SD10/NUMA100127
Order Guide: Outer Dia.(A)+Inner Dia.(B)+Reamed Dia.(C)+Inner Dia.of Casing Shoe(D)+Hammer Type(E)

本网站由阿里云提供云计算及安全服务 Powered by CloudDream